Double Glazing

[fixerupper]

Ok here's a thing , I'm fitting a new wooden window its the last one out of ten that I have made for this house . I picked up the glass yesterday from town and the glazier has made the units out of 4mm and 5mm glass with a 6mm spacer .. so that give an overall thickness of 15 mm,and the rebates I have cut are 30mm so that leaves plenty of space to pin in the wooden beads
I'm happy with that I guess it save a bit of weight over the six 400mmx300mm panes ... My question is shall I put the 5mm glass on the inside or the outside will it make any difference ?... to be honest I did'nt notice if he had done the same with the other 9 windows ....jeff....

 

[mike os]

It should say if one p and is e glass, no sticker on it saying this side in ? Otherwise just do them all the same way

 

[fixerupper]

Thanks Mike ...no stickers or owt like that ...and I've just fitted the frame in the wall ...so I'm gonna glaze the sash with the 5mm on the out side ...jeff

 

[Kent]

even if it had low E it will still work the wrong way around to a degree, in Greece I don't think you have a requirement for it. Was slightly confused by you saying 5mm pane till I realised it wasn't UK