Cutting Chart - Current, air pressure, flow, materials etc.

[Bladevane]

I've searched for some generic reference material which would provide some guidance values for current, air pressure, speed of travel etc for various materials and thicknesses but maybe I am looking in the wrong place. I have an i-TECH Cut 40 and IFL tell me they are working on a guide which they will send out in the future but at the moment it's still experimental. This is all fine and dandy but I'm sure someone out there has recorded some details of his/her exploits which may help others to avoid the frustrations and pitfalls of plasma cutting. Here's hoping.

 

[roofman]

I've searched for some generic reference material which would provide some guidance values for current, air pressure, speed of travel etc for various materials and thicknesses but maybe I am looking in the wrong place. I have an i-TECH Cut 40 and IFL tell me they are working on a guide which they will send out in the future but at the moment it's still experimental. This is all fine and dandy but I'm sure someone out there has recorded some details of his/her exploits which may help others to avoid the frustrations and pitfalls of plasma cutting. Here's hoping.

BOC welding depots have them on the counter free for welding ect...would you like me to pick you one up??

 

[rtbcomp]

Yes please, scan it and post here

 

[roofman]

Yes please, scan it and post here

its a circular card that passes a small window on the outer card so as you turn the seeting appear across the window...un-scanable. Ime going monday for a couple of tungtens,ile see iff i can blag a few and 1st past the post gets em!!

 

[rtbcomp]

Video? Multiple scans?

Reserve one for me and I'll give it a go if you like, as long as there's no copyright notice on it.

Maybe I could take it to bits, scan the parts and users can print them out and make their own - Blue Peter Rules OK!

 

[roofman]

Video? Multiple scans?

Reserve one for me and I'll give it a go if you like, as long as there's no copyright notice on it.

Maybe I could take it to bits, scan the parts and users can print them out and make their own - Blue Peter Rules OK!

LOL will do...ile put a pic up of mine and you,ll see why its un-scanable

 

[Bladevane]

Roofman - thanks for the tip about BOC centres. I'll try to get one seeing as how my thread has been hijacked!!

 

[Bladevane]

So, I popped into the Rotherham Gas and Gear Centre to see if I could get hold of one of Roofman's circle things. The guy behind the counter knew what I was on about but had not seen any for 12 years or so. There's an opportunity here for some aspiring entrepreneur.

 

[roofman]

So, I popped into the Rotherham Gas and Gear Centre to see if I could get hold of one of Roofman's circle things. The guy behind the counter knew what I was on about but had not seen any for 12 years or so. There's an opportunity here for some aspiring entrepreneur.

Ahhh sorry mate its missed my mind,had a lot on my plate with this and that...still need to get to my depot next few days so i wont forget once i get there