Right, I use an air fed mask fed by a 2hp 50l compressor, at the oment I cart the compressor outside and run the line in so it picks up only fresh air, however this was always only a temporary solution as the 50l frequently gets used elsewhere.
I have now laid my hands on a second 3HP 200l compressor however this is not as easy to drag outside when spraying as it has no wheels.
Now, would I be able to leave it inside and run some 6" PVC ducting from the air filter on the compressor to a vent on the wall? Can anyone spot any problems/restrictions with this setup? This would allow me to duct both of the 200l compressors and link them together to share the load.
I have now laid my hands on a second 3HP 200l compressor however this is not as easy to drag outside when spraying as it has no wheels.
Now, would I be able to leave it inside and run some 6" PVC ducting from the air filter on the compressor to a vent on the wall? Can anyone spot any problems/restrictions with this setup? This would allow me to duct both of the 200l compressors and link them together to share the load.
