Cleaning, pre-paint, degreasing etc.

[Jaeger_S2k]

I've been using Isopropyl Alcohol, to degrease and dust clean parts for painting.
Just noticed I could be running low.

I've also got 50 litres of Beta Clean 3300 Glass Cleaner.

BETACLEAN™ cleaners provide advanced surface preparation and are a vital part of the adhesive repair process for direct glazing, as well as sealing and bonding of body panel repairs. Additionally, BETACLEAN™ can be used to remove excess uncured adhesives from a variety of finished and unfinished surfaces.

• Non-smearing cleaner used to clean glass, ceramic frit, encapsulations (PUR-RIM, PVC) and polyurethane pre-applied adhesive systems (PAAS) prior to priming
• Removes dust, dirt and many common contaminants
• Promotes dirt, road film and grease cleanup
• Evaporates quickly to save time and ensure a dry, residue-free bonding surface.

As it's just for final cleaning pre-paint/primer. Would it be suitable for a wet wipe?

 

[graffian]

Water the isopropanol down?

 

[ajlelectronics]

Commercial panel wipe (slow) and some brake cleaner.