Clarke 130EN 130 amp 110 volt

[Turbogn]

The regulator which comes with this kit. Will it fit the larger bottles or is it only good for the small cans?
Thanks

 

[shenion]

The regulator is separate. Part #WE6540 is for refillable tanks.

Many dealers include it as part of a package, that is how I got my 130EN/regulator.

 

[malcolm]

Going to depend which regulator you got. Post a photo and someone should be able to tell you. As a rule of thumb if it has a gauge then it'll work on the big bottles.

 

[weldequip]

Certainly in the UK all the Clarke hobby MIGs (and other makes) are supplied with a canister regulator which cannot be used on refillable cylinders. They are a totally different fitting for one, and they won't stand the higher pressures in a refillable cylinder.
You need to upgrade to something like this...



weldequip

 

[shenion]

In the US, you don't see the disposable cylinders. I don't even see the regs or cans listed on the US dealers site. Must not be imported here.

All listings I see have the unit and the regulator separate. My regulator was part of the "package deal" and was shipped separately.

 

[Turbogn]

This is the one I am looking to buy.

http://cgi.ebay.com/Clarke-130EN-Mi...yZ113743QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[shenion]

That is the dealer I bought my 130EN + regulator from. That is probably the best price you'll see with the regulator included.

They are first-class outfit. Have bought lots from their web site (weldingdepot dot com).

My unit was damaged by UPS, I never even saw it, they marked the shipment as returned for damage just as it was "out for delivery".

Emailed weldingdepot, about the damage. Their response "I'll ship another out today and settle with UPS later."

The 130EN is a good little unit. I do wish i spent extra for the 180EN. The 130 strains on 1/8" steel.

 

[FireStorm]

price: US $310.00 Buy It Now >

Make No Payments Until 2008 Apply


no wonder why the lending rates are so high!!!!!!!

 

[DIY]

Certainly in the UK all the Clarke hobby MIGs (and other makes) are supplied with a canister regulator which cannot be used on refillable cylinders. They are a totally different fitting for one, and they won't stand the higher pressures in a refillable cylinder.
You need to upgrade to something like this...

View attachment 1369

weldequip

Can you put a link in for this regulator and hoes

 

[madkayaker]

http://www.weldequip.com/argonmix-conversion-kit.htm

http://www.weldequip.com/co2-conversion-kit.htm


Depending on your bottle type