Chainsaw doesn't smoke...

[Memmeddu]

As title.
my chainsaw despite does four-stroke , despite sounds good , and whatever you might expect from a good chainsaw.
it doesn't smoke at maximum RPMs no load .
2.5% full sintetic fuel mix
it does have a muffler mod but it should smoke I believe

 

[pedrobedro]

It shouldn't smoke if you are using the right mix ratio and good quality oil. It should 4 stroke on full revs but clear up when pulling the chain through wood. Don't run it too weak at the top end of the H screw or it will lean seize.

 

[Memmeddu]

It shouldn't smoke if you are using the right mix ratio and good quality oil. It should 4 stroke on full revs but clear up when pulling the chain through wood. Don't run it too weak at the top end of the H screw or it will lean seize.

Definitely good quality oil and .5% more than what's recommended.
It full revs .
It's not lean ,2 full turns on both L and H jets .
Am I worrying too much about?
It's my only good chainsaw

 

[pedrobedro]

What make and model is it ? You can find the initial carb settings for most on the net. My Stihl is 1.25 turns out on both screws to get it close then fine tune it from there. I run mine on Aspen2 as they stand for a while and it saves emptying them.

 

[Memmeddu]

What make and model is it ? You can find the initial carb settings for most on the net. My Stihl is 1.25 turns out on both screws to get it close then fine tune it from there. I run mine on Aspen2 as they stand for a while and it saves emptying them.

Jonsered CS2036 TURBO
First 90's still not Husqvarna just jonsered

 

[pedrobedro]

It's a Walbro carb so the settings sound about right should be fine running at that. Use it and don't worry it's a nice little saw.

 

[Memmeddu]

I'll do .
Thanks for the tips