Cemont TX201 EC

[saintnz]

I'm after a Tig torch/lead for the above welder. If someone can point me in the right direction on what to buy, it will be highly appreciated.

Thank you

 

[pedrobedro]

If you get an adaptor you will be able to use a cheap valved scratch start torch from ebay. A WP17 is a good compromise between power and size unless you will be using full amps a lot then you need a larger torch like a WP26.

 

[saintnz]

Thank you for the link

 

[saintnz]

http://s1228.photobucket.com/albums/ee443/Teflonnz/Fabrication/

I brought this welder secondhand (cheap) but I can't find any info on it.

Above are photos of the internals - still in the process of sorting out a torch

 

[saintnz]

I ended up buying an WP-17 torch from China - I found the 7pin Cemont plug locally.

HF is working fine.


The two pins I used are circled in the photo below: