Hi All
Ordered some more cellulose from Jawel last week and when I went to use it I opened the tin (2.5l)
and started mixing it ready to use with a small gun I was using to get into corners of an engine bay. The problem was that the paint was full of small hard particals like grit that would not disolve.
I made up a small amount 50 50 with top quality thinners then tried to filter this into the gun. This took
a lot longer than usual due to the grit. The paint went on ok but the finish is poor and flat even with a final coat of 70 80 % thinners.
any ideas
Cameron
Ordered some more cellulose from Jawel last week and when I went to use it I opened the tin (2.5l)
and started mixing it ready to use with a small gun I was using to get into corners of an engine bay. The problem was that the paint was full of small hard particals like grit that would not disolve.
I made up a small amount 50 50 with top quality thinners then tried to filter this into the gun. This took
a lot longer than usual due to the grit. The paint went on ok but the finish is poor and flat even with a final coat of 70 80 % thinners.
any ideas
Cameron