Cable liner for Bernard gun

[owz]

Hi all,

A question on behalf of an old friend of mine in the US, I hope someone might be able to assist...

"The part I need for my welder isn't in production any longer, and it is going to cost 10x's what I was expecting it to cost to get it working.

I have an discontinued Bernard gun for my Lincoln SP 100. I need to get a 10' cable liner for .035 wire and some contact tips."​

Any ideas? He's stuck, and obviously it would be good if the cable liner and contact tips could be sourced cheaper over on this side of the Atlantic.
Who knows? But it's worth a shot.

Cheers.

 

[Wozzaaah]

Here ya go.
Even if the torch is obsolete there may be common parts which will fit. If not then he may have to retro-fit a newer torch.

 

[shenion]

Most liners are the same, just the outer shell has changed over the years.

You might have him look at weldingdepot.com. I have had good service from them.

If all else fails, you can get a Parweld gun that will fit the SP100.

 

[owz]

Here ya go.
Even if the torch is obsolete there may be common parts which will fit. If not then he may have to retro-fit a newer torch.

Most liners are the same, just the outer shell has changed over the years.

You might have him look at weldingdepot.com. I have had good service from them.

If all else fails, you can get a Parweld gun that will fit the SP100.

Thanks both, I've passed on the info. Welding's an expensive pastime!

 

[NotANormalCoder]

This could be a really old 'G' or 'H' type Bernard gun. Identifiable by huge chromed metal trigger screwed to the handle. If so, I have some old parts still in stock and I can get more.
Post pictures and maybe somebody can help further.
Dave