Hello, can anyone give me any advice on this TIG/MMA Inverter sealey welder, it is a TIG200s ? i am new to TIG welding and want to take it up, i am looking at buying this welder but im not sure on weather sealey are a good machine or if there are better machines out there that are the same size or bigger for the same price, thanks.
- Thread starter Ruadhán
- Start date
Good current range but no post gas flow for cooling/not oxidizing the weld.
No AC for aluminium, no 2T/4T arc on/off control.
I have a very basic TIG machine but it has post gas flow and is a lot cheaper - it's a SIP 178HF
No AC for aluminium, no 2T/4T arc on/off control.
I have a very basic TIG machine but it has post gas flow and is a lot cheaper - it's a SIP 178HF
waddycall
Member
- Messages
- 1,942
I have a thermal arc 175 te. It was cheaper then the Sealey machine and has adjustment for slope down. Post flow is pre-set. It also has 4t/2t trigger option as well as the HF start the sealey has. I upgraded from a thermal arc 175 se which has basic lift start tig only. I've found both machines to be very good. I believe they're made in the far east but the quality seems good. The 175te looks like the same machine as the Esab buddy tig. Good luck with your purchase!
