Longhorn6120
Member
- Messages
- 268
- Location
- Kent, UK
No, haven’t maxed it out yet. Only got to 5 on the power so far.Interesting have you maxed it out at 250a for a decent run on a 13a extension?
No, haven’t maxed it out yet. Only got to 5 on the power so far.Interesting have you maxed it out at 250a for a decent run on a 13a extension?
I was just looking....they also do a 250A too...although the 200A should be good for 5mm a little bit extra never hurts?I've got a rohr mig 200 in the basket at the moment
Now you've thrown a spanner in the works!i think one of the things you should be looking for is wich is more simple for repair. If you need to repair the machine you need to find the schematics of the machine or some repair man that has them or know knows how to repair them. As for the 250amps forget them on a single phase line. If you open the welder you should find a 180A/U or a 160A/u shunt on it so at best a 180 or 160 machine. by the way check this one https://weldes.co.uk/gb/migmag-welders/243-weldman-midi-mig-220-inverter-welder.html i think its the same machine, And i think that is best on warranty than the roht.
Wow that is a nasty web site, it automatically added the welder to my 'basket' and asked me to check out, that would be good enough reason to not buy from them. (welds.co.uk to save any confusion)Now you've thrown a spanner in the works!
Don't get too worried - go to checkout . . . new select country . . . or rather, move to a country they will deliver to . . . UK/England isn't one of them anymore . . .Wow that is a nasty web site, it automatically added the welder to my 'basket' and asked me to check out, that would be good enough reason to not buy from them. (welds.co.uk to save any confusion)
Good.Don't get too worried - go to checkout . . . new select country . . . or rather, move to a country they will deliver to . . . UK/England isn't one of them anymore . . .
Getting anything 're filled' rather than exchanged is difficult in the UK, getting a cylinder re filled with some gas other than what it was filled with originally will be a challenge.Can someone point me in the right direction of what regulator and hose I would need for the Rohr 200. Also can I get a co2 suregas bottle refilled with argon 5? There is one going for cheap near me