Best value for money thin slitting discs?

[HughF]

i need to buy some slitting discs and In the past have had good experience with 3m and klingspor. I had terrible, almost disaster results with silver line when on a job in the Middle East, don’t want to make that mistake again...

What brands are good value for money? I cut steel and stainless mostly, up to around 4mm, anything thicker gets gas/plasma/tct saw...

eBay/amazon links only ideally, can’t be faffing about with any other retailer, online or otherwise...

 

[eLuSiVeMiTe]

Not sure how they will stack up on price compared to others but find these cut well and last a lot better than others Ive used.

https://www.powertoolworld.co.uk/bo...121w_VMX1yha5GdF4ONuwbeDf5bNls7hoCaj4QAvD_BwE

 

[Wightsparks]

These Rhodius are great. I buy them in preference to the cheaper version https://www.toolstation.com/shop/p13340 (and they are on offer, need to go and stock up!). Few others on here of the same opinion I believe.

 

[123hotchef]

These Rhodius are great. I buy them in preference to the cheaper version https://www.toolstation.com/shop/p13340 (and they are on offer, need to go and stock up!). Few others on here of the same opinion I believe.

hey they are probably my favourite I have 10 packs of those on the shelf at any one time. 9.99 is when i buy mine from toolstation too

 

[sardine]

Silverline disks are made out of recycled poppadoms.

 

[123hotchef]

Silverline disks are made out of recycled poppadoms.

soggy ones

 

[gaz1]

i bought 2 packs of these

https://www.ebay.co.uk/itm/PACK-OF-...964891&hash=item2a46b0d5dc:g:9AEAAOSw54xUVNud

ive used them with cars they do well and even with me cutting thick 3/4" steel they take about 2 disks 10" wide steel cuts ive also cut 2 1/4" steel bar with them

im not hash with them i let them do there work

i bought from here failed to deliver them ended up buying from above

https://www.ebay.co.uk/itm/PACK-OF-...964891&hash=item361fe18937:g:N1gAAOSwUgRZoBUB

 

[slim_boy_fat]

i bought 2 packs of these

https://www.ebay.co.uk/itm/PACK-OF-...964891&hash=item2a46b0d5dc:g:9AEAAOSw54xUVNud

ive used them with cars they do well and even with me cutting thick 3/4" steel they take about 2 disks 10" wide steel cuts ive also cut 2 1/4" steel bar with them

im not hash with them i let them do there work

i bought from here failed to deliver them ended up buying from above

https://www.ebay.co.uk/itm/PACK-OF-...964891&hash=item361fe18937:g:N1gAAOSwUgRZoBUB

Thanks for that link . I've just ordered a pack of 50 of these at 115mm to fit my grinder for £21, looks like excellent value to me. My current ones [can't remember the brand off-hand] seem to wear out quite quickly, although I sometimes push then a bit......

 

[ukracer]

These Rhodius are great. I buy them in preference to the cheaper version https://www.toolstation.com/shop/p13340 (and they are on offer, need to go and stock up!). Few others on here of the same opinion I believe.

Just picked up a pack...even on offer they are £1 a disc so they need to be good....

 

[Turbo]

I bought a box of bosch ones locally & they were absolute rubbish.

My favorite are Dronco but I bought a load of parkside discs when they were on offer in Lidl & they are surprisingly good!

I think I saw discs on offer in Screwfix, not sure of the quality.

 

[HughF]

I might be passing toolstation today, I'll pop in and try the rhodius ones. Toolstation is probably the only non Internet retail experience I can handle.

 

[daedalusminos]

I now prefer the Rhodius discs over the Flexovit ones that I was using - appear to last longer.

 

[8ob]

Have tried most of the thin discs and found these to be both durable and value for money https://www.ebay.co.uk/itm/100-X-BL...277795?hash=item43f3c05823:g:~RMAAOSwawpXufvU
I dont bother looking elsewhere any more and just repeat purchase.

Bob

 

[Ashley Burton]

Have tried most of the thin discs and found these to be both durable and value for money https://www.ebay.co.uk/itm/100-X-BL...277795?hash=item43f3c05823:g:~RMAAOSwawpXufvU
I dont bother looking elsewhere any more and just repeat purchase.

Bob

Are these actually that good?

 

[Ashley Burton]

I bought a box of 25 Klingspor for £15, But not fully convinced. Used several discs last weekend & unsure if they normally should wear as quick!

 

[8ob]

Are these actually that good?

My fabby is a miserable bad tempered git and if something like a disc is not right he will launch the whole box into the skip rather than use them up, he likes these

Bob

 

[God mode restorations]

I use flexovit 0.8mm discs.
These are the best I have used .

 

[Burdekin]

Been using Tyrolit and really decent.

 

[Burdekin]

Silverline disks are made out of recycled poppadoms.

Off topic but I really like their FFP3 foldable disposable masks.

 

[julianf]

Whenever I go by trago mills, I stock up on the Bosch ones at 50p per disc.