Flathead_Dave
Member
- Messages
- 325
I'd try one of these
http://www.halfords.com/webapp/wcs/..._productId_530659_langId_-1_categoryId_165572
The 8mm might grip,or maybe the 6mm will wangle on,as the thread diameter will be under 7mm.
If welding a nut on,have the nut just above the end of the stud.As you weld,rotate the gun as with puddle welding.The heat alone should release the stud.Mig won't do it as well as Tig or a 1,6mm arc rod IMHO.
http://www.halfords.com/webapp/wcs/..._productId_530659_langId_-1_categoryId_165572
The 8mm might grip,or maybe the 6mm will wangle on,as the thread diameter will be under 7mm.
If welding a nut on,have the nut just above the end of the stud.As you weld,rotate the gun as with puddle welding.The heat alone should release the stud.Mig won't do it as well as Tig or a 1,6mm arc rod IMHO.