1mm Tip for Clarke TE160

[madjakmclaferty]

Hi, Any ideas where I can get one of these. Machinemart only do the 1mm tips in the smaller size for the 151 and down hobby migs, I have a larger torch off the Clarke te160 on mine .

Weldequip does not seems to be responding, probably on holiday.

Any one else know where I can source these?

 

[Wozzaaah]

Weldequip's probably just a bit busy, he must get several PM's a day and does run a shop too
He will have them on the shelf or if there's an agri spares place near you they may have them too.

 

[madjakmclaferty]

Thought he may be busy but I did PM him last week and emails just seem to bounce.

 

[madjakmclaferty]

For anyone else who may search this thread later, I could not find one but bought some spare .8mm tips and a 1.25mm drill and drilled the centre hole out. I used a lathe as a hand drill will snap the drill in the tip (tried that). A detail drill may be more effective.

The 1.25 mm drill gave enough clearance for the 1mm stainless wire while welding.