1K Paint for refinishing GRP?

[Jelly_Sheffield]

I have a gigantic stack of Laycorn Boxes (AKA "Thomas Bins") I was given by a friend, which are in slightly beat up condition.

I would like to paint them all to a uniform colour (ideally not olive drab), to cover up where I have patched the bullet holes with Kevlar tape (and epoxy).

Is there a suitable 1K product, which is sprayable for adhering to GRP?

Otherwise I guess it's a case of using epoxy topcoat with a roller, which if fine but I know to be an awkward job that gives very "meh" results.

 

[ajlelectronics]

I have a gigantic stack of Laycorn Boxes (AKA "Thomas Bins") I was given by a friend, which are in slightly beat up condition.

I would like to paint them all to a uniform colour (ideally not olive drab), to cover up where I have patched the bullet holes with Kevlar tape (and epoxy).

Is there a suitable 1K product, which is sprayable for adhering to GRP?

Otherwise I guess it's a case of using epoxy topcoat with a roller, which if fine but I know to be an awkward job that gives very "meh" results.

Either epoxy primer or an etch primer. Otherwise it will fall off.