Enquired abut the 5 year warranty on a jasic mig welder here in Ireland and was told as follows. I buy the welder and have to register with Jasic within the first month to avail of the 5 year warranty, failure to register in that time frame will result in a 2 year only warranty. If anything...
Thats true what you say and it's worth trying it at any rate.
I can buy a new compressor for €645 and the reed plate kit is €223
so you would have to wonder is it worth spending too much money
on it.
The trouble is that it has the damage done to both the reed plate and the head. it might be worth
getting the gasket and reed kit and fitting it. Do you think the wear on the head will affect it adversely
it the reeds are held in their proper place?
The reeds are intact, however there are 2 locating pins that locate the reed plate to the piston barrel
and locate the bottom reeds then protrude the reed plate and locate the top 2 reeds against the head.It is these 2
upper reeds that the locating pins had worn away and caused the reeds to...
Thank you for the prompt replies lads
It is hard to pick it up in the photo but there is a lot more wear on one of the reed seating
area than on the other, the area that you have arrowed is worn down more on one side than
the other and compared to the other side is significantly worn more and...
Hi, i would like to ask a question regarding a head for a compressor.
I have a 200 L 3hp, 2.2kw Aircosse compressor that has some wear on the head
where the valves were moving around as the locating pins had worn away.
I can buy a new valve plate, valves and gaskets everything bar the head.
My...