Hi all,
I picked up a 3 phase linisher and have installed a single phase motor on it.
Would it be possible to wire up the 3 phase starter to run the single phase motor? It also has a foot stop that I would like to wire in.
Starter and foot switch:
Inside of starter:
The top row reads A B C 1
Bottom row reads L1 L2 L3
The 2 red wires with the crimp connectors went to an e-stop that I will not be using, so will just join these together. The one on the top right with the blue wire crimped to it went to the foot switch.
The brown wire with the crimp terminal on it connected to 1 also went to the foot switch.
The light brown, white and brown wires coming out of the top left was the 3 phase input.
The red black and green wires with the black sheath going out of the top right went to the 3 phase motor.
Back of the foot switch:
I picked up a 3 phase linisher and have installed a single phase motor on it.
Would it be possible to wire up the 3 phase starter to run the single phase motor? It also has a foot stop that I would like to wire in.
Starter and foot switch:
Inside of starter:
The top row reads A B C 1
Bottom row reads L1 L2 L3
The 2 red wires with the crimp connectors went to an e-stop that I will not be using, so will just join these together. The one on the top right with the blue wire crimped to it went to the foot switch.
The brown wire with the crimp terminal on it connected to 1 also went to the foot switch.
The light brown, white and brown wires coming out of the top left was the 3 phase input.
The red black and green wires with the black sheath going out of the top right went to the 3 phase motor.
Back of the foot switch: