puffernutter
Puffernutter
- Messages
- 1,804
- Location
- Wiltshire
I was going to title the thread "large nuts" but you may have thought I was boasting!
Not quite a vanity project, but these are taking no real load.
I have built a small frame to take two full size signal levers in the front garden and the hole size is suitable for a M22 screw and nut, probably no longer than 40mm. I'll need to weld the nut to the frame as once installed, access underneath will be difficult.
However, the only seem to come in large length and with the associated cost.
I need 8 screws (hex head) and nuts They don't have to be pretty as I am sure they will rust pretty soon, so any suggestions for a source please?
Cheers
Peter
Not quite a vanity project, but these are taking no real load.
I have built a small frame to take two full size signal levers in the front garden and the hole size is suitable for a M22 screw and nut, probably no longer than 40mm. I'll need to weld the nut to the frame as once installed, access underneath will be difficult.
However, the only seem to come in large length and with the associated cost.
I need 8 screws (hex head) and nuts They don't have to be pretty as I am sure they will rust pretty soon, so any suggestions for a source please?
Cheers
Peter