cliff366
Member
- Messages
- 448
- Location
- Essex
Managed a day yesterday while the weather was nice started to form the rear arches by making to wooden formers out of ply and clamping the sheet between and slowly hammering it over to create the shape and lip still needs a bit off dolly work to get a crisp corner but it's somewhere there
also the 2" beam I had brought the adjusters had the thread stripped which I never noticed so going to make that a fixed beam in the end so picked up a 4"that's all good bar rot on the lower shock tower so gave that a good grid back and started to cut the plates ready to weld them in one evening
havnt got any pics yet as forgot
also got some 8mm tube and got them bent to shape ready to weld on the rear frame to make a skeleton to lay the sheet metal on so been busy but not really progressed as it's all been time consuming jobs
also the 2" beam I had brought the adjusters had the thread stripped which I never noticed so going to make that a fixed beam in the end so picked up a 4"that's all good bar rot on the lower shock tower so gave that a good grid back and started to cut the plates ready to weld them in one evening
havnt got any pics yet as forgot
also got some 8mm tube and got them bent to shape ready to weld on the rear frame to make a skeleton to lay the sheet metal on so been busy but not really progressed as it's all been time consuming jobs
Last edited: