Morning Gents, does anyone have any recommendations for a small ish front print vertical bandsaw with angle table up to 45 degrees.
Will be used solely for cutting exhaust manifold collectors from 1.6mm walled stainles tubing.
I see these "Elektra Beckum BAS 315" floating about all the time for £3-400, they have a tilt table which is ideal, but not sure if it would be man enough for stainless tubing or could it be modified to suit?
I'm struggling for space in my workshop which is another issue, the BAS 315 overall foot print is ideal and would fit in my workshop nicely...
Otherwise, I have a budget of £1000-1500
Will be used solely for cutting exhaust manifold collectors from 1.6mm walled stainles tubing.
I see these "Elektra Beckum BAS 315" floating about all the time for £3-400, they have a tilt table which is ideal, but not sure if it would be man enough for stainless tubing or could it be modified to suit?
I'm struggling for space in my workshop which is another issue, the BAS 315 overall foot print is ideal and would fit in my workshop nicely...
Otherwise, I have a budget of £1000-1500