Hiya,
need to re-roof my shed/workshop and am planning to use box profile sheeting.
Any tips and tricks, or where to get it cheap/seconds gratefully received
Roof is 9.5m x 5.1m. It currently has timber rafters across the short span which the current corrugated concrete roof panels are secured to. Plan is to infill these with Kinspan, leave a small air gap above and then use the box section. Probably then line below the kingspan with OSB or similar.
Realise condensation could be an issue, will be using Kingspan in the walls as well, looking for a good supplier of seconds on that too!
Cheers,
MM
need to re-roof my shed/workshop and am planning to use box profile sheeting.
Any tips and tricks, or where to get it cheap/seconds gratefully received
Roof is 9.5m x 5.1m. It currently has timber rafters across the short span which the current corrugated concrete roof panels are secured to. Plan is to infill these with Kinspan, leave a small air gap above and then use the box section. Probably then line below the kingspan with OSB or similar.
Realise condensation could be an issue, will be using Kingspan in the walls as well, looking for a good supplier of seconds on that too!
Cheers,
MM