stevewidds
Member
- Messages
- 66
- Location
- Westyorkshire, England
Hi again as the title says I'm about to start spraying the inside of the body shell (boot, interior floor, and engine bay) with jotamastic 87 primer then metallic cherry red base and then clear top, so all the panels have either zinc primer or new black coating from new coating but its all been scratched up ready for the jotamastic my main question is whats the best way to do it do I.
2 to 3 coats of jotamastic then 3 coats of base and 3 coats of clear, and each stage within 48 hours of each other.
Do I rub down with different grades between primer and again after base, and I dont have oven to bake with, any help is much appreciated thanks Steve.
2 to 3 coats of jotamastic then 3 coats of base and 3 coats of clear, and each stage within 48 hours of each other.
Do I rub down with different grades between primer and again after base, and I dont have oven to bake with, any help is much appreciated thanks Steve.