im going to ask a daft question now, but why cant you just wheel the bikes around? ive tried getting a heavy bike onto those dollies and it was a nightmare and took longer than just wheeling the bike around to where it needed to go
im going to ask a daft question now, but why cant you just wheel the bikes around? ive tried getting a heavy bike onto those dollies and it was a nightmare and took longer than just wheeling the bike around to where it needed to go
There's not enough room when all the bikes are in, and it's a total nuisance making space to maneouvre around. I've had enough of that.im going to ask a daft question now, but why cant you just wheel the bikes around?
Deep ends on the exact nature of the centrestand geometry. Some are better than others, and as I've just modded the GS one to suit its new forks and tyre sizes, it's now a perfect fit for this. The XJ has sufficient spare oomphness to accomodate a dolly too.ive tried getting a heavy bike onto those dollies and it was a nightmare and took longer than just wheeling the bike around to where it needed to go
I can do that with the XS, the GS isn't far off Gold Wing weight, and I've no wish to snap the sidestand or my back. Anyway, I've tried it and it didn't work.Or if you put your bike on its side stand and spin it on the stand
Takes a bit of practice getting the balance right then it's easy-ish
They get washed once a year, need it or not.How is that going to wash the bikes
Easy with a lightweight sports bike.
Fancy coming to try it with my 1/4 tonne + top heavy BMW where the sidestand is already a bit less than straight?
I don't mind you trying, just so long as you bring enough cash to replace the bits you break when you drop it
Easy with a lightweight sports bike.
Fancy coming to try it with my 1/4 tonne + top heavy BMW where the sidestand is already a bit less than straight?
I don't mind you trying, just so long as you bring enough cash to replace the bits you break when you drop it
I could spin my K1200LT on the centrestand. Need to make sure the weight is kept backwards though, or many tears could result.
I'm going to make four of these,I need to get a quote for folding the channels.A pair of braked wheels on one end should make it easier to get on and off.
Apart from the cost,three of my bikes have rear stands,so MM ones wouldn't work,and you can pack them closer if they're upright.
https://www.machinemart.co.uk/p/clarke-mcd1-motorcycle-dolly/
I'm going to make four of these,I need to get a quote for folding the channels.A pair of braked wheels on one end should make it easier to get on and off.
Apart from the cost,three of my bikes have rear stands,so MM ones wouldn't work,and you can pack them closer if they're upright.
https://www.machinemart.co.uk/p/clarke-mcd1-motorcycle-dolly/
A turntable shed each.Get the bikes a shed each, no need to move 'em around.