Hi dernt I finally got the set and took some boards out to have quick checks. Processor board behind the front screen seems to have a missing Ram chip (marked on board as ram) but I need to investigate it as there are other chips covered with stickers and one could be a Ram. If you read this post I would appreciate help.Hi!
These welders are on ebay and very cheap!
According to the description I could be an issue with the capacitors!
the description like, that should be not a big problem! If the welder itself is welding that there is no big problem with the driving circuit or mosfet issues!
I fix an Magic wave 2600 lately and can give you help!
What do you mean by “ cheap “. I bought mine non working( intermittent )for ~ £500ish? There is one non working ( completely ) seller asks for £1200.Hi!
These welders are on ebay and very cheap!
According to the description I could be an issue with the capacitors!
the description like, that should be not a big problem! If the welder itself is welding that there is no big problem with the driving circuit or mosfet issues!
I fix an Magic wave 2600 lately and can give you help!
£500 delivered. I think is a very good price as I got it with the cooler and is in very good cosmetic shape. It's 300A machine. I don't have torch but will make myself one for the fraction of the price of a ready made one. About capacitors, mine are all good but they go bad sometimes, even as big as these DC caps in the unit. This is what, 20-26 year old welder.500 for a intermittent faulty machine is not a bad deal anyway.
Ian-DIY, I’m back with MW 2600. I need to assemble a torch for it, do you have pin out for for torch connector by any chance?500 for a intermittent faulty machine is not a bad deal anyway.