brewdexta
The biggest tool in the box
- Messages
- 5,488
- Location
- UK
I have swapped out a motor with a 5/8" shaft for one with a 16mm shaft so the pulley block needs to be enlarged a little, about 0.125mm.
I have almost every reamer except 16mm and my adjustable reamers jump over that size. But I do have a 16mm drill.
I have put the pulley in the lathe and the drill in the tailstock but before I did it and made a mess, I thought I would ask. I haven't clocked the pulley in the chuck yet but would do before attempting to drill.
Opinions? I'm tempted to buy a 16mm MT2 reamer, or maybe get the missing adjustable reamer, I'm in no rush.
Cheers
Andy
I have almost every reamer except 16mm and my adjustable reamers jump over that size. But I do have a 16mm drill.
I have put the pulley in the lathe and the drill in the tailstock but before I did it and made a mess, I thought I would ask. I haven't clocked the pulley in the chuck yet but would do before attempting to drill.
Opinions? I'm tempted to buy a 16mm MT2 reamer, or maybe get the missing adjustable reamer, I'm in no rush.
Cheers
Andy