Repair man
Member
- Messages
- 43
- Location
- Lancaster
Hello anyone,
The search for my lost Sirocco CO2 heater body was unsucsessful and I can only think of an occasion 5 or 6 Months ago when tipping some rubbish into an empty wheely bin and hearing a clunk that I should have done some excavating, so have decided to find a new heater. Sirocco heaters are on ebay priced between £80 and £250 but I have found a Chinese heater for around £60. but they don't seem to know if they are suitable for CO2 Siphon Cylinders. I have sent messages to two sellers and these are the replies -:
My Message to Seller in China £56
Hello askorbas,
Please can you tell me if this unit is suitable for - Heating CO2 from CO2 Siphon (Dip Tube) Cylinders. Kind Regards Trevor
Reply
hello we don't know not tested
My Message to Seller in Albania £128
Hello, Can you tell me if this heater is suitable for use on CO2 Syphon or (dip tube) type CO2 Cylinders please, to supply CO2 as a sheilding gas for mig welding. I have lost my 240 Volt Sirocco heater that I used. Kind Regards Trevor
Reply
Hi,
if you have a nipple and nut for connection, you can use for every co2 source. Thanks
Second Message to Seller in Albania £128
Hello savasunal1,
Thank you for your exceedingly fast reply.
Please can you confirm that it is suitable for - ( Vaporising liquid CO2) from CO2 Siphon (Dip Tube) Cylinders. I require the liquid CO2 from my Siphon cylinder to be vaporised.
Very Kind Regards Trevor
Reply
hi again,
These are designed for " All heating operations provided by the carbon dioxide heater are to prevent the gas flow from being cut off while you are welding" . And i am not sure if it is suitable for what are you looking for. but you can try this item and if it not compatible, you can return the item. Best Regard
So has anyone got any sugestions other than to buy a non Siphon cylinder
Repair Man
The search for my lost Sirocco CO2 heater body was unsucsessful and I can only think of an occasion 5 or 6 Months ago when tipping some rubbish into an empty wheely bin and hearing a clunk that I should have done some excavating, so have decided to find a new heater. Sirocco heaters are on ebay priced between £80 and £250 but I have found a Chinese heater for around £60. but they don't seem to know if they are suitable for CO2 Siphon Cylinders. I have sent messages to two sellers and these are the replies -:
My Message to Seller in China £56
Co2 Pressure Reducing Meter Mixed Gas Heater 36C/220V Reducer Control Valve | eBay
Co2 Pressure Reducing Meter Mixed Gas Heater 36C/220V Reducer Control Valve Material:Brass Pressure:High Pressure Power:Pneumatic Standard or Nonstandard:Standard Power Source:AC Media:CO2.
www.ebay.co.uk
Please can you tell me if this unit is suitable for - Heating CO2 from CO2 Siphon (Dip Tube) Cylinders. Kind Regards Trevor
Reply
hello we don't know not tested
My Message to Seller in Albania £128
CO2 HEATER 230V 75W ----75°C--- 230Bar | eBay
The outer surface of the heater is covered with a protective guard. All heating operations provided by the carbon dioxide heater are to prevent the gas ow from being cut off. It has been designed to prevent Carbon Dioxide pressure regulators from overcooling.
www.ebay.co.uk
Reply
Hi,
if you have a nipple and nut for connection, you can use for every co2 source. Thanks
Second Message to Seller in Albania £128
Hello savasunal1,
Thank you for your exceedingly fast reply.
Please can you confirm that it is suitable for - ( Vaporising liquid CO2) from CO2 Siphon (Dip Tube) Cylinders. I require the liquid CO2 from my Siphon cylinder to be vaporised.
Very Kind Regards Trevor
Reply
hi again,
These are designed for " All heating operations provided by the carbon dioxide heater are to prevent the gas flow from being cut off while you are welding" . And i am not sure if it is suitable for what are you looking for. but you can try this item and if it not compatible, you can return the item. Best Regard
So has anyone got any sugestions other than to buy a non Siphon cylinder
Repair Man