The Artilleryman
Member
- Messages
- 449
- Location
- Boston UK
Not very happy with the Part P electrician doing the bathroom electrics - SWMBO's project - he is planning to run the Whirlpool bath and electric towel rail on a spur from the ring final circuit. Says cannot use the bathroom radial as it's too heavy - 6mm - is it? Pump wiring is 0.75mm2 - lead fitted to pump by factory.
Original cable was for the immersion heater and power shower pump - long since removed.
I know that the RCBO might need to be reduced from 16A.
Thoughts from those better qualified than me please.
Original cable was for the immersion heater and power shower pump - long since removed.
I know that the RCBO might need to be reduced from 16A.
Thoughts from those better qualified than me please.