Paul The Pie Eater
Member
- Messages
- 55
Hi all, has anyone ever made a shot blaster from a butane/propane gas cylinder? I am thinking of making one but I am unsure on how they are plumbed internally. Before anyone shouts "Health & Safety!". I know how to make the bottle safe. I will open the valve to drain the gas, (nearly empty anyway). Then remove the valve and fill with cold water to remove all the gas before I start fabricating. What I would like to know, is how the blast medium is fed from the cylinder to the nozzle and if the cylinder is permanently pressurised.
Many thanks, Paul.
Many thanks, Paul.