Hi All,
My first post.
I've been welding on and off for a few year's ... but have never tackled stainless welding.
My machine is a clarke 135TE and I have stainless wire 0.8 and Argon.
I need to fabricate a set of stainless manifolds - which will be 1.6mm (16swg) joining to a mild steel flange plate.
Now - I presume you can use either mild steel wire or stainless wire to join the stainless tube to a mild steel flange plate.
What about welding 1.6mm stainless - does it require a similar ampage and wire feed to that used for mild steel ..
Thanks.
My first post.
I've been welding on and off for a few year's ... but have never tackled stainless welding.
My machine is a clarke 135TE and I have stainless wire 0.8 and Argon.
I need to fabricate a set of stainless manifolds - which will be 1.6mm (16swg) joining to a mild steel flange plate.
Now - I presume you can use either mild steel wire or stainless wire to join the stainless tube to a mild steel flange plate.
What about welding 1.6mm stainless - does it require a similar ampage and wire feed to that used for mild steel ..
Thanks.