Got some time to get practice in and this was how it turned out. Will try and give all the details
Using and old Sip 130, 0.8 wire an 2mm thick box. Also I have to run from an extension lead, unrolled it fully. Its rated at 10amps but dont know its wire thickness.
Got a copy of the manual from Sip technical which indicated med/high setting and 4.5 -6.5 inches on the wire feed.
I have only had mayb half an hours practice total but this session I could not get a nice sound. I think I was having trouble setting the wire tension. Too much so it felt like it was popping and pushing the torch away then too little. So this is what I ended up with.
Any advice would be greatly appreciated.
Using and old Sip 130, 0.8 wire an 2mm thick box. Also I have to run from an extension lead, unrolled it fully. Its rated at 10amps but dont know its wire thickness.
Got a copy of the manual from Sip technical which indicated med/high setting and 4.5 -6.5 inches on the wire feed.
I have only had mayb half an hours practice total but this session I could not get a nice sound. I think I was having trouble setting the wire tension. Too much so it felt like it was popping and pushing the torch away then too little. So this is what I ended up with.
Any advice would be greatly appreciated.