marknotgeorge
Doing sums for a living since 2009.
- Messages
- 473
I finally did some welding on my TR7 today! Actually, all I did was filling in a pinhole created by rust on a second hand rear panel I acquired for the princely sum of £3 plus a trek to Manchester.
Here's the damage, which the twisted wire wheel in my angle grinder quickly dispatched:
After welding. The hole on the right is a number plate mounting hole:
After a blast with an 80 grit flap wheel:
Not much, but it's a start...
Here's the damage, which the twisted wire wheel in my angle grinder quickly dispatched:
After welding. The hole on the right is a number plate mounting hole:
After a blast with an 80 grit flap wheel:
Not much, but it's a start...
Last edited: