Using this welder, got it from someone off here other week. At moment flux core.. hoping at weekend i can get a pub bottle and its filled ready...
Anyway the flux and just wire one i have are the larger size, the one i have on axle stands in the photo is the flux core, it doesnt feed through smooth if its inside the machine..
the normal wire i have, is on a even bigger reel, it wont fit in the machine (i think...need to double check, its in a photo) ... so is there a way i can use it ok?
any times or ideas would be great, i dont have a shed or workshop... so i have to get it out each time and set it up, rather than have it already in 1 place.. Got side of drive to use only... i got the welder to do 3 small holes on the Delica i bought other week... so at moment just playing around and trying to get hang of it. ta
I got the sheet of 1.5 MS for a fiver and lots of other off cuts, some 3mm but the house electric trips when i have it on max settings..so guess will have to stick with thinner metal.
Anyway the flux and just wire one i have are the larger size, the one i have on axle stands in the photo is the flux core, it doesnt feed through smooth if its inside the machine..
the normal wire i have, is on a even bigger reel, it wont fit in the machine (i think...need to double check, its in a photo) ... so is there a way i can use it ok?
any times or ideas would be great, i dont have a shed or workshop... so i have to get it out each time and set it up, rather than have it already in 1 place.. Got side of drive to use only... i got the welder to do 3 small holes on the Delica i bought other week... so at moment just playing around and trying to get hang of it. ta
I got the sheet of 1.5 MS for a fiver and lots of other off cuts, some 3mm but the house electric trips when i have it on max settings..so guess will have to stick with thinner metal.
-
IMG_20180924_180133.jpg455.9 KB · Views: 49
-
IMG_20180920_141317.jpg428.2 KB · Views: 43
-
IMG_20180913_154717.jpg327 KB · Views: 38
-
IMG_20180913_160232.jpg353.5 KB · Views: 39
-
IMG_20180905_173629.jpg651.2 KB · Views: 35
-
IMG_20180905_175108.jpg375.8 KB · Views: 45
-
IMG_20180905_125912.jpg445.4 KB · Views: 49
-
IMG_20180905_125954.jpg243.1 KB · Views: 36