My kempak super 150 arc/tig pls help

  1. MR MARK A GREVATT New Member

    Messages:
    5
    Location:
    Buckinghamshire
    Hi guys just joined. I'm new to welding and just started to learn this enjoyable trade

    I just recently purchased a second hand kempak super 150.

    I'm wondering if anyone would possibly have a owners manual. For this welder.

    I've tried contacting kemppi but had no luck and really would like the Manuel to go with my machine. As I said I'm new to welding and have a long way to go. But am enjoying every minute of it. I would be so grateful for any help. if someone does have a copy of a manual..

    Right now I'm restoring the outside cover and given it a good clean. I've tried trawling the internet but no luck so far.
    Any help would be greatly appreciated

    Many thanks Mark
     
    • 20180112_134959.jpg
  2. Richard.

    Richard. Member

    Messages:
    18,095
    Location:
    Cambridgeshire
    Do you need a manual to know how to use it?
    It is very simple. 3knobs. Current, down slope and post gas.
     
  3. MR MARK A GREVATT New Member

    Messages:
    5
    Location:
    Buckinghamshire
    Hi richard thanks for getting back to me I just wanted the manual if there was one as I trying to restore it.
     
  4. slim_boy_fat

    slim_boy_fat Forum Supporter

    Can't help with the manual, Mark - but welcome aboard :waving:
     
  5. MR MARK A GREVATT New Member

    Messages:
    5
    Location:
    Buckinghamshire
    Thanks guys does anyone know what foot pedal I would need for the kempak 150. And has anyone got any past experience with this machine in tig mode.
     
  6. MR MARK A GREVATT New Member

    Messages:
    5
    Location:
    Buckinghamshire
    I made the red cover for the large dial As it was missing one lol
     
  7. Appyasme1

    Appyasme1 Member

    Messages:
    1,389
    Location:
    Lancashire
    What is it you need to know?
     
  8. Dennis Aspö

    Dennis Aspö Member

    Messages:
    941
    Location:
    Finland
    I had that machine but without the TIG unit, solid but choppy feel when arc welding, my newer inverter kemppi (24 years old lol) is smooth like a dream by comparison.

    I think they use the same connections and so you probably want a Kemppi C100F pedal, or try and connect any other cheaper pedal with a 10k potentiometer to the welder, the 4-pin outlet controls the microswitch for the TIG pedal. This diagram should work for you:
    https://drive.google.com/file/d/0B13oqaUf1WTdbzFFX3lWM21ZTDlCZHQzVUZMRmRuWWFaZzI4/view
     
  9. MR MARK A GREVATT New Member

    Messages:
    5
    Location:
    Buckinghamshire
    Thanks Dennis really appriciate your help
     
Advertisements