Hi,when I pull the trigger on the torch gas comes but no wire,when I push the wire feed button on the welder the wire feeds through.I put the torch on another welder and it worked fine,can anyone help? Thanks.
This would be due to a failure of one of the ICs on the pcb. If you're handy with a soldering iron, replace IC1 (NE555) which is most likely the cause. Otherwise, we have s/exch pcbs or there are members of this group that can repair these.
Dave
Thanks for getting back to me Dave,my eye sight would,nt be the best but I know a fella thats right and handy with a soldering gun so ill gice it to him and see what he can do.I,ll let you know how I get on.
Thanks for getting back to me Dave,my eye sight would,nt be the best but I know a fella thats right and handy with a soldering gun so ill gice it to him and see what he can do.I,ll let you know how I get on.
Got the pcb back today and that little fix worked a treat,the welder lives again.Thanks for the sound advice without it I would have bought a new pcb at a much greater cost than the little fix which cost me a pint,thanks again