Locker needs shelves - any ideas?

[Curiousgeorge]

Hello all.
Simply question, I guess: I have a 'Probe' locker that I'm tired of just throwing everything in. As you can see from below, there looks like holes to put shelves but I'm wondering are these a 'thing' that one can buy or do I have to (get help to) fabricate a couple?

Thanks, guys....

https://drive.google.com/open?id=1Zn1kUDbEYs5J3D1cv_nrNptFWA19KAaq
https://drive.google.com/open?id=1uF3AYa5WuA0O0SMNjTYqjufRfbR0Ihfu
https://drive.google.com/open?id=1lu2uKpiBZB8BKPtGVn-ydEnfd0xegD8U

 

[slim_boy_fat]

Google is your friend, here's your starter for 10.....

https://www.ebay.de/i/391608119218?chn=ps

 

[Curiousgeorge]

I can, hand on heart, say that I have never seen these before

 

[colnerov]

Hi, I like that they sell you them in packs of 10, when you need 4 per shelf. They could at least do them i multiples of 4.

Colin

 

[Curiousgeorge]

Hi, I like that they sell you them in packs of 10, when you need 4 per shelf. They could at least do them i multiples of 4.

Colin

I’ve just looked in my kitchen cupboard and seen loads of these buggers. Doh!! Sorry guys....and thank you.

 

[Wallace]

Those pins are designed to locate in MDF & chipboard, the locker has punched holes so they will not locate and support a shelf correctly. Link to Probe accessories.

 

[addjunkie]

Neat cut ply, bead of silicone n the underside, Tomorrow itll be set and good to go.

 

[Curiousgeorge]

Those pins are designed to locate in MDF & chipboard, the locker has punched holes so they will not locate and support a shelf correctly. Link to Probe accessories.

Thank you. I believe these are what I need - Probe Cabinet Shelf Clips - Probe CSC Pack of 4? (I can make my own ruddy shelf at least

 

[slim_boy_fat]

Those pins are designed to locate in MDF & chipboard, the locker has punched holes so they will not locate and support a shelf correctly. Link to Probe accessories.

Must examine links more carefully myself

 

[bigegg]

I used some 25mm angle brackets, popriveted on

 

[slim_boy_fat]

What about those thingy-ma-bobs they use to hang stuff on pegboard? Some of those styles might suit?

 

[jsf55]

I just put some chunky pop rivets in the hole and didn't break them off, been on my locker last 7 years

 

[bricol]

M6 screw straight through from outside, nut run up inside . . . or tek screws when I was feeling in a rush for a temporary support 15yrs ago . .