Shedendman Member Messages 5,193 Dec 30, 2018 #1 Stumbled into this on the utube thought i'd share BTW can anyone name that tune?
Shedendman Member Messages 5,193 Dec 30, 2018 #3 Bob Rivers said: Beethoven, Egmont overture...... Click to expand...
E eddie49 Member Messages 4,025 Location Reading, Berkshire Dec 30, 2018 #4 The motor that was originally in his burnt-out angle grinder would probably have run at 30,000 rpm, so replacing it with a 1000 - 2000 rpm pillar drill spindle will give you a rather slow sander/grinder/polisher.
The motor that was originally in his burnt-out angle grinder would probably have run at 30,000 rpm, so replacing it with a 1000 - 2000 rpm pillar drill spindle will give you a rather slow sander/grinder/polisher.
Ashley Burton Member Messages 5,123 Location Northamptonhire Dec 30, 2018 #5 Seems alot of work for not a massive benefit. Will keep to my drill / bench grinder I won't be spending my time making one of these I'm afraid
Seems alot of work for not a massive benefit. Will keep to my drill / bench grinder I won't be spending my time making one of these I'm afraid