ned
Member
- Messages
- 942
- Location
- Eire
Hi all,
I want to use a mig gas cylinder for an air application, because I want a large safety margin. These cylinders are rated to 2000psi and I want it for a 200psi application.
So just to get that out of the way, the reason I'm looking for this information is out of concern for safety.
So the 25E orifice is 25.8mm or thereabouts, which is close to the major diameter of 3/4"
I want to use the biggest airlines I can, 3/4" would be ideal, and 1/2" will be okay too.
I have been looking online for 25E to 3/4" adapters, but I'm not seeing much. Do they exist, where might I look?
Any tips or ideas appreciated. Criticism also appreciated, it's all to the good.
I want to use a mig gas cylinder for an air application, because I want a large safety margin. These cylinders are rated to 2000psi and I want it for a 200psi application.
So just to get that out of the way, the reason I'm looking for this information is out of concern for safety.
So the 25E orifice is 25.8mm or thereabouts, which is close to the major diameter of 3/4"
I want to use the biggest airlines I can, 3/4" would be ideal, and 1/2" will be okay too.
I have been looking online for 25E to 3/4" adapters, but I'm not seeing much. Do they exist, where might I look?
Any tips or ideas appreciated. Criticism also appreciated, it's all to the good.