Sorry I have not been around for a while busy and stressed, but whats new.
I did do the pics but they are not required as the rubber inserts only went in about 300mm and I did manage to cut and shut the axles to length with success.
After evicting the mice and their bedding, spiders and the...
A cheaper and more practicle solution maybe to have a whole new pipe made in hydraulic hose or if your local agri engineering firm have the facilities to make up a new pipe out of steel or ally or even copper.
They would be able to put the correct radius bends in it, if made out of flexible...
The only 'dumb question' is the one you DONT ask about, then hash it up.
Never be afraid to ask a question, advice costs nothing (usally) mistakes cost.
Hi, I know but some people would think it a good alternative:whistle:, I was just citing the consequences of someone actions who should have known better.
There is NO chance of using it as fuel in this country, it aint dry enough for long enough (though the last month has been the exception)...
I got one of their 230 mm (9") angle grinders, first time out it got snagged in some angle iron, shattered the disc and blew the bevel gear, went with an almighty bang.
Upon dismantling found the bevel gear to be made of some really cheap monkey metal probably old Skodas or even Zetor...
PLEASE dont go round setting fire to your manure heap, an equestrian centre got prosecuted last yr by the environment agency and it cost them over 20k in fines and costs.
This is ok if you can leave the field without any horses in it for a while for the smeared over the top of the grass muck disappears, but is no good for worm control (equine parasite variety)
It all quite literally depends on how mechanised the new tenants are willing to become in the future...
Theres another secret out of the bag then:whistle:
It is also worth noteing, for anyone using a cylinder mower to use veg oil for the cylinder bearings, roller (front and rear) bearings and chains/sprockets.
As it does not kill off the grass like mineral based oils do.
You dont need to fence it, just get a couple of laser guided mini guns similar to the military sentinal system, even a mouse would have a hard time getting past that:laughing:
COR, there lookers aint they.
Just be calm and move slowly around them and they will soon get used to you, well the one who brings them food and water anyway.
What they do go bonkers for is maggots get a quarter pint from your local fishing tackle shop every so often (whites please) you can...
On a more serious note, keep a carefull watch on that index finger as you have burned it all the way round and I would think quite deeply too, it could turn out very nasty.
Any loss of sensation, weird colouration or the nail not 'pinking up' after ten seconds moderate pressure applied to it...
They are about 20 months away from that yet, so enjoying them whilst they are around.
I taste better to them at the moment stand still for a second and they lick and chew you all over.
At the age your talking about they are about 3ft tall at their shoulder, we have six of the little monsters in at the moment raised from the bucket and they are about five months old now.
Aberdeen angus cross Holstiens all black with very little white on them bar the odd tail tip and white foot...
The shaft locking pin is already there and the shank of an 8mm drill bit does the front sprocket, the crankshaft 'should' remain static as should the camshaft sprocket.
The main problem I have found is the timing marks can be a bit troublesome to identify normally because of the muck and grime...
Just strip down the front of it again OH joy and check it over.
Did you just do it by pinning the front of the injector pump and not locking it on the shaft, if so you could be half a tooth out and this would make a difference at higher engine revs.
I would for the sake of it check the valve...
dont know how you got on with it, but before you go ripping all the wiring out try putting a volt meter on the pos terminal earth it to the body, a significant drop in voltage as you turn the key will indicate the starter motor is drawing power but not working.
No noticeable drop would indicate...
50x50 box section may well sound over the top, but you get that 600kg bouncing around on top and not wanting to load, then you can see why it is used.
It is better to be over engineered than have your horse go through it.
I would recommend you go with the box section , not the angle option, the...
to my observations as a cancer stick user and life long zippo owner I have at some time or other put most flammable liquids in to mine.
lighter fluid is more refined I think and burns cleaner
Petrol tends to smoke a little and makes the fags taste foul for a bit
Two stroke makes it smoke, taste...