Gave this some use today and seems to be working well, no moisture in the inline filter at the gun, less water at each ball valve on the cooler and hardly any in the filter regulator on the wall.
Got this finished up, put one leg of 22mm in and mounted it directly to the cold wall.Filter i bought had no o rings between the yoke and the body when i got it which the seller neglected to tell me.
whats people thoughts on which way round this would work better, i built it for air going in the left and out the right but im now thinking it would possibly work better the other way around?
Dryer by stewart.d.campbell posted Sep 16, 2019 at 9:42 PM
Was looking at a kit with 2x10m hoses with the water trap in the middle, i have 2 hoses, 1x1/4 and 1x1/2.So am i right in thinking 1/2 to water trap then 1/4 to gun with inline filter at the gun?
I have a workshop heater.On another note i notice u pol do 2 different speeds of pannel wipe, should i be using the fast or slow?
Edit, i went for slow as i will have more time to wipe off.
Hi, going to be spraying a few bits (bumper, bonnet and spoiler) in cellulose and was wondering if i have done enough to dry the air.I have bought a silverline water trap to go on the compressor and a
Royalmax inline sprayer filter to go on the gun...
Hi, i have an old civic thats floor and chassis is very rusty and the metal has thinned quite a bit.I previously about a year ago wire brushed it all and put dinitrol convertrust on it followed by dinitrol 4941.Most of it has lasted to some extent but some areas at the front of the floor and...
Hi, going to be using a 1" drive impact gun and i normally use 1/2 hose with pcl xf connectors but im thinking for this i would be better with 1" hose with claw fittings straight off the tank.Any drawbacks other than having to open and shut a valve when changing tools?
Lots of 1 inch drive impacts seem to have handles albeit most on the sides, i have never used an impact with a handle either but this is the sort of size difference compared to a 1/2 in for those that have not used one and its bloody heavy.Impact Guns by stewart.d.campbell posted May 24, 2019 at...