I'm looking for a tool chest to get for Xmas - probably about £150 tops.
Can anyone recommend any?
I've been looking at this one, but it had friction drawers rather than ball bearings:
Halfords 7 Drawer Cabinet
Doesn't matter if it has a tool chest on top of the cabinet, but would...
I'm looking into designing some items for a project, and need part of it vacuum forming. However, I'm hoping to make quite a few of them to sell on and make a little bit of money.
Does anyone know of any friendly vacuum forming companies around the Leicester / Nottingham area, and any tips...
Thought I'd take the thing apart using a Dremel - found that the batteries are just 2 x CR2032 watch batteries, and one of them wasn't making contact properly. Bent the contact metal slightly, and voila, working!
Decided to tape the whole thing back together, in case I need to take it apart...
I meant I wore the fixed darkness helmet, and held up the auto darkening cassette in front of me.
I've left it in the light for a while, but still doesn't seem to change under our bright halogen lights.
Hi all,
Is there an easy way of testing an auto darkening helmet to make sure it's working, before trusting it with my eyes?
My dad picked one up at a car boot for £3 this morning - if it works...awesome, if it doesn't...no big loss!
It's a Modulo helmet, with a Protane Electronic...
I've got the same welder, and with the following, which were all spot on:
Regulators
Shroud and Tips
I bought the C02 regulator and got a pub sized C02 bottle from a place in Loughborough. I already had the wire (0.6mm) with the welder, so went with a new shroud and 0.6mm tips.
The Mini floor is originally one big piece from the boot to the engine bulk head. I'm basically cutting out a square to put a replacement floor pan in place.
When welding the floor pan in, as an overlap, would I weld on the edge or slightly in? What's the best seam sealer to use?
As far as I know, it's a MINI One with a Cooper S engine transplant - still running the supercharger I think. Not sure if that run was with NOS or not, but definitely on slicks.
There's been quite a few turbo conversions (supercharger to turbo) recently, and plenty of talk of more to come...
That is some awesome piece of hand work!
Have you ever done anything for a MINI (BMW)? I'm a member of a site called MINITorque, who are all about the power - one of the well known tuners (1320) has just set a personal best of 11.22 seconds for 1/4 mile.
I'm welding a new floorpan into our Mini, and have been advised it's best to have an overlap, and weld on both sides.
Does anyone have any example pics of doing this, and tips for getting the best results? I've attempted it, but not having the best of luck.
Cheers!