these were shot blasted and etch primed, i painted the silver first, then painted the black. after painting the silver i'd suggest using 2" wide masking tape (i used 1") and cut around with a stanley knife blade, i'd ordered some 3m fine line tape thinking it would go around the corners and it'd...
well langy, I have just spent 3 days might even be 4 reading the build from start to finish, cant believe i haven't seen it before, anyway just like to say what an awesome read it was and unbelievable attention to detail which when finished people will just miss, thanks for taking the time to...
I have/used a proper 110v dehumidifier running on a timer for 6 hours or so from about midnight to 6 in the morning during the winter months, I'd empty the bucket (with a lid) every week usually get about 5 litres of water, in my last garage it was mounted to the wall halfway up the wall with a...
In case you haven't sorted this, the brown sleeved cable indicated by a yellow circle shape supplies the contactor, (underneath the brown sleeve mine were pink and purple IRC)
where the green circle is, that's where one of the wires connects to the contactor, the other wire connects in the...
i have read other forums on the use of plastic pipes for compressed air as some people were scared when it let go under pressure they had visions of shards of plastic firing off in all directions,
guess i'll be using old fashioned copper when i do mine
well depenadant what was on the inside, internal mounted 3/4 inch round bar 4 inches apart welded into angle, the rawlbolted to the wall, weld the bolt heads.
or the same angle iron frame and then expamet, fixed as above,
but then 9in petrol grinder isn't gonna be stopped by much :S...
i replaced my fibre concrete sheets, ok its abestos, with box section and just left the old angle iron up, even bought new J hooks to use with the box section,
rang up my local council, double bag the sheets, and booked in a time slot to dispose of them inside a roll on roll off skip, had to...
good luck with the pick up :D
looks like mine, except i never had inner wings, probably should have bought new ones, but mine was older, also i think my transmission might have been 1 piece, as it was older magic wand tunnel that i had to cut my own hole,
i also bought the floor panels...
yep thats the cebora, looks like its been left out in the rain, hmm still got the wire clip on the torch, mine fell ages ago :)
i'm going to carry out a euro torch conversion when someone can tell me what voltage soleniod valve to use