Put it in manual and turn back your wire to round the 4 mark, your on the hunt for a manual welder id be very surprised that you wouldn’t get that going a bit better than that, I wouldn’t even be messing with synergic for that if it’s more or less the one type of work you’re at. You should have...
If it’s welding well in mild steel, it’s probably the driver, if your not happy with the stainless synergic settings write them down and turn it into manual and put in the volts and wire speed you wrote down and keep adjusting them slightly till you get it right. In synergic have you the right...
Plenty of money to be made in welding just have to aim to get pipe welding and coded welding I made plenty at it often made more than the engineers on the jobs.
Do not buy cebora, I bought a synstar 250 pulse, was good enough machine till it threw a fault one day, and cebora uk weren’t the best to deal with. If limited to single phase I’d buy a 3 phase machine and rotary phase converter with welding switch on it really opens up your options.
Something I noticed lately and it might apply to you was I had a 400 amp Oxford and it was very crude and I had an a autostar 250 it was better but not great, but I was running on a 12kva single phase electric connection, coming in low voltage from 2 poles away recently I put in a 29kva single...
If you put on the earth near where your welding preferably the same member as your welding and you clean the steel and make sure your well earthed that’s the secret. Putting on the earth on a bolt at the opposite end the car and maybe the earth sparking god knows what way the earth will travel...
I recently had compressor woes bought the 100 litre in the link below serious compressor, tops it’s self up in 30 seconds with no draw. But a serious price think it was 1100 euro
https://www.abacaircompressors.com/en/professional/mobile/standard/mobile-air-compressors-200l/a49b
Change flex head and check alll connections are tight and not leaking from flex head to bottle, a leak can cause air to be sucked. Turn up pre gas to about 1.2 seconds it will allow any contaminated gas to pass before arc is lit. Make sure the end of the pipe your welding is covered, there may...
I have seen Kempi mls 3000 mastertigs and old square thermal arcs sanrex ones take some hammering, welding at 250 amps all day often out in rain and wind and snow and heat and I never ever seen one broken and there not new, if you buy a quality inverter u will get service transformers have done...
Oerlikon citofix , oerlikon overcord z and oerlikon fincord m are good rods,
Any rod from a reputable manufacturer
Oerlikon Lincoln Ine bohler esab will be good rods, once dry
After that it’s either,
The machine,
The fit up,
The wrong process Been used for the task,
Or most probably the...
Does anyone no how much the pulse upgrade is for the cebora synstar 250 ? And can it be upgraded to pulse after if bought standard. I no cebora won’t be no fronius lorch, but what are they like in terms of reliability repairs?
Your probably better off buying a big honda petrol generator like such
https://www.donedeal.ie/tools-for-sale/honda-7kva-petrol-generators-metrix-/28035904 and buying the transpocket, more versatile that combo, I have the Honda welder sincro dc unit, its fine for fitting work site work but I...