I would need to top coat it to stop it going chalky though. I would default to cellulose since I am familiar with it but willing to try something else...
Looking for a recommendation for painting spraying a fiber glass trailer lid. Has some metal strengthening. Some small damage has been filled. I am not looking for a perfect show finish by any means. Would look for something with reasonable build to soften some of the imperfections. Would even...
I bought a new air hose to use from my water trap to my gun. AC Brooklyn. €40. 1/4 inch Euro fittings with a 3/8 diameter hose. Quick disconnect on one end.
Very odd doesn't provide as much pressure as the old 1/4 hose ( from Aldi) of the same length. I see big pressure drops once the trigger...
Thanks Turbo. I am looking at 10-15m . Will look at 1/2. I was just perusing the water and oil traps/filters. I actually have one already that is 1/4. I think the answer is yes...but does it matter too much if there is a narrow pinch point like this in the run ?
Cheers.
Dave.
I want to plumb in my compressor and create some dog legs as Malcolm Vardy has on the main site. Was going to use copper when I came across this style of fitting. Uses plastic tubing and would be whole lot easier to work with...
Yes I check. Have exactly the same device. Humidity is relative so I hear the garage for some time before spray painting. Raise it about 5 degrees above ambient temperature for a while. I want to get some heat into the building and the car not just the air. I have a couple of electric...
Probably have to rub off. Check the tech sheet on what you used but many can only be applied to rust. It needs it for the chemical reaction. You should get yourself some from Bilt Hamber. Hydrate 80 i think is the product. It can be used on both clean and rusty steel. Forms a nice cost to take...