An hour is far too long. If you are spending more than a couple minutes max p/valve, then they need looking at properly, possibly recutting of the seats etc. Its meant to be a v.quick and light finishing process.
From the C12 instruction pages:
To change the notification settings of an app, tap Settings > Notifications > App settings > Most recent > All apps and switch the app's notifications on or off.
That trio is completely different unfortunately.
I've gone through all the options *again* and there definitely isn't a reset (again I'm sure there will be in Advanced, but certainly not accessible to the consumer).
Annoyingly this particular IHD seemed very popular ~2018/19 but documentation...
Able to advise how?
There's no reboot option, unless its buried behind Advanced settings and the magic pin number. I've checked the device for any pins to hold down etc and no such luck there either.
I've already spoken to the beyond helpful (not) customer service team at British Gas where I'd already predicted every answer long in advance, so thought it was worth a punt putting the feelers out for ideas on here.
Have a Geo Smart IHD in the house. Had worked absolutely fine for the past 5...
Does the sound change when cornering? More prounounced or quieter in a particular direction on corners - usually helps identify side if it is a wheel bearing
Sussed it!!
The washer (in front of the spring) had the slightest of bends in it. I'd noticed this on the initial strip down but hadn't really thought anything of it.
Having been on a walk with the dog whilst racking my brains out I realised that could easily "catch" the pin and cause the...
My record has decided its time to play up and has started "sticking" when first winding it out.
It only occurs if the jaws are completely shut up or maybe up to 5mm open as a starting point. Start to unwind and instead of the jaws opening, the spring gets more and more compressed (can feel it...
Wiring to fuel pumps in older fords was god awful - I often saw ~10v at the pump on 80s/90s era.
I know yours is newer but tbh I wouldn't even waste time trying to work out why, I'd just rewire it. Use the original wiring as a trigger on a fresh relay and straight from battery live (new earth...
This has done the trick - well a variation of it. Managed to angle the blade just enough to make a pair of slots (obviously wonky slots due to angle, but slots none the less) 180degrees from one another. Then using an old knackered but nicely squared off screwdriver* that fitted just right and a...
Its not actually a nut. Its all one cast piece (held down by x4 bolts, 3 of which can be seen in the picture). The "nut" bit is internally threaded which the manifold screwed into, and where a bit of the snapped manifold remains.
I'm guessing in a less cheapy cheap version of the switch you are...
Hi All
I decided it was time to start sorting some of the leaks on my ancient, small but reliable compressor.
Clearly the chinesium has degraded from toffee to wet toffee in the 20yrs I've owned it and despite trying to ease gently, I've ended up with the manifold breaking at both bloomin' ends...
Those plug ends aren't protectors. Some cars will utilise the plugs with them on and others without. Saves the manufacturers having to create multiple parts/part numbers if the "core" plug is identical.
Quick question ref your modded baffle plate in the rocker cover - are you not a little...