Has anyone on here used this kemppi adapter? It must have a liner within it so can you change it when it wears or clogs? Or the case of bin the whole thing and buy another?
You will get a quicker build up of weld with the 1mm wire on higher settings so it better for thicker material 10mm or more. I just use 0.8mm and weave it if welding thick material.
Cheers for the replys. I can get the correct liners from the one and only supplier in the uk. I will just buy the 0.8 liners as 0.8 wire is quite versatile as have welded up to 12mm plate with it. I'm not bothering with a euro conversion because I bought a brand new torch as a spare and its...
Hi. I am going to buy a couple of mig liners to keep for spares. There are two sizes for my torch 0.6-0.9 or 1-1.2mm. I will never use 0.6mm wire and currently using 0.8mm wire and might need to use 1mm wire in the future. Would it be possible to use the 1-1.2mm liner for 0.8 wire? It would save...
Yes I will do that get a 20amp c type breaker and a 32amp socket as I want things to be right. I see i could run a slightly bigger machine like the portamig 216s off the 20amp aswell so thats good.Thanks guys!
I didn't think there would be a problem running it from the house board. The thing is I bought a welder and needed power to my garage. I know next to nothing about electrics and asked the sparkie to wire me up so I could run my welder etc. I am now realizing things haven't been done right. I...
The 32 amp breaker is only there because the b16 amp was tripping so should be getting replaced with a c16amp. The garage is on the house consumer unit on a 32amp breaker.
hi I have a boc 190c mig welder single phase. I have just had a new 6mm swa cable wired up to my garage with a 16amp socket fitted for the welder. The problem is I can't run it on full power or it trips the breaker. It was wired to a b16 amp and because that didn't work my electrician fitted a...