AC18 and 25 are the same pump they are made to run at different RPM to change the output.
Min rpm 600 Max rpm 950.
Normal rpm AC18 720 AC25 950.
Cylinder bore 3" Stroke 3."
Oil cap of crankcase 2pt.
Min working pressure 15psi.
Max working pressure 150psi.
Min ambient 0 deg C.
Max ambient...
Test your windings first before you part with your money. Check the resistance between the top pin and the left bottom pin (start winding). note the resistance. Then test between the top pin and the right bottom pin (run winding) and add the resistance value to the start value. whatever the...
Take the inlet air filter off and then run it till it reaches the 3Bar, then switch off at the mains NOT the pressure switch. Then put your ear at the inlet and listen see if you can hear air passing by the valves or head gasket, then switch off at the pressure switch so that the discharge pipe...
In that bunch is a brand new facom 8th from the left which was the most expensive but its heavy and the jaw is not as tight as the cheaper kennedy, I like the feel of the irega which is the same as the rothenberger, but they are old so expect a bit of play in them, the teng I just got today and...
I had misplaced my old fave 8" shifter which was a CK branded one so decided to buy some bacho ones to replace it, just because I have some bigger bacho`s and would like to keep the way they open and close the jaws the same, hopefully to stop the `damn wrong way` scenario. Anyway bought other...
Its more than likely a refrigeration compressor, that's a inlet strainer in your hand, you can open and close the king valves on the compressor to service the system. Someone has used a fridge compressor to make an air compressor there.
Does that back wall freeze up at all Steveo, It should freeze up then auto defrost. Does it keep your food cool, What I have seen a lot is people putting the shelves back in up side down, a lot of them have a bracket/stopper arrangement to stop you pushing your fridge contents up against the...
3/8 hose to belt not 5/16, then a 5/16 whip if you prefer, high flow euro connectors as well. the mask takes what it needs up to the 100 psi max line pressure, what pressure do you need at the gun for your Delorto (same as the JGA I suspect 35-45). Those little regs are handy just on your belt...
With a 10m 3/8 hose to the filter on the belt, I have to set it to about 70psi at the wall regulator to feed the gun 29psi and satisfy the air fed, I believe mine should whistle at around 40psi if the pressure drops. I have the supply to the Y piece on the mask filter, then a small reg on the...