Got a 3 phase startrite bandsaw in the workshop for wood only cutting and use a VFD to i can run from single phase, wanting to run a vacuum so when i press start on the VFD to make the bandsaw run my vacuum will also come on at the same time. Is there a switched output on the VFD i can use to...
Thanks for the advice everyone, i have relocated the PCV where it is shown in the diagram and have done more research on where and why the tundish needs to be located.
My only other question is:
From the 'cold water out' i will have a feed going to my mixer tap on shower, mixer tap on basin...
Hi guys,
Know its not the right forum for this, but tonnes of other general questions get answered on here so i willgive it a go before joining a plumbing group.
I have bought a Rointe rome water heater for a 'granny flat' on our property, no gas etc so has to be electric, so this model ticked...
I recently bought a 90 degree milwaukee m12 die grinder, i am gobsmacked how good it is, that good i will be buying a straight one also.
I had a few of the early m12 stuff and ended up selling it due to not being keen compared to the m18 gear, but after buying the die grinder, belt file sander...
Looking at buying a tecnik stove in preparation for next years winter, 8 or 12KW.
I am looking at also heating the next room along from my weld shop.
Had an idea to weld on to the side of the burner a steel box, with 6mm steel plates as fins, then having the outlet going to 200mm ducting. The...
Perfect, thanks everyone.
My last question is, if i found a single phase unit like a 301 / 352 would i be able to use a PWM speed controller to get it to a slow enough pace to cut metal (with the right blade of course)
https://www.united-automation.com/product/vac2-s-15e/
I am on the look out for a startrite bandsaw for my workshop to do some wood / metal cutting. I have been offered a 3 phase 0.9KW 18 series saw, but my workshop only has single phase. If i were to buy an inverter / VFD unit would anyone be able to tell me the current draw when i were to use the...
Does anyone have any experience using TCT holesaws, planning on buying some to replace slow cone cutters / normal holesaws. Thinking of something like 16,20,36,50,75,100mm in size. Would be using in a pillar drill / maybe a hand drill if im unable to use the pillar in some sort of situation...
In a pinch could i make an adaptor for generic 20 tonne hydraulic press with a pair of sharp teeth from a box and pan folder, with two welded together in a + type arrangement, and successfully split a few larger logs?
Looking at getting a Tecnik stove net year and dont have a log splitter for...
Hi guys,
I use a 14ft blueline box trailer for transporting my small classic mini around, to make strapping it up a bit easier i have ordered a pair of custom access doors to fit into the front of the trailer. Wondering what the best way to cut the GRP is, i have the usual air saw (which i...