I was getting the correct voltages across the phases which were something like: 400V between L1 & L3, 400 between L2 & L3 and 160V between L1 & L2.
How do I check the DOLS?
Hi Everybody,
I know there are some knowledgeable people on here after reading previous posts but I haven't managed to find the answers i'm looking for!
I have a 3 phase screw type car ramp. A 4kw High torque static converter. and a 6Kw single phase generator.
We have hooked it all up but...
They need to be about 75mm long. They are going to be used to do a body lift on a Vitara. They need to go through the hole in the chassis , up through a 3" box section and then tighten onto this captive bolt on the body!
Sadly I do not have a lathe, nor do I know someone who does have a lathe! Only need 8!
Thanks for the offer, i'l send them an email and see what they say, thanks for the heads up!
Il start off by saying that if this is in the wrong section then I do apologise!
I'm looking for the bolts shown in the picture below. They need to be about 75mm long and either an M8 or M10 with a hex head on the top and an internal thread. I don't know the exact sizes I need yet because I...
Thanks! I didn't think it was too bad for 3.5 hours work! Ive got some underseal in the garage as I need it to cover the inner sills of the vitara! Ive got a mate as well thats a pretty good painter so will probably get him to just paint it for me assuming that it passes its re-test tomorrow! I...
Well I sorted it tonight. Im pretty please with how it turned out to be honest considering its only my 2nd time doing this sort of thing, the first time was Thursday when I was fixing the inside sills on my Vitara!!
Anyways il let the pictures do the talking but its just about finished, need...
Thanks for the replies chaps! I need to finish doing the sills on my Vitara so it will probably be tonight or tomorrow night il get the wire brush out and clean the area up a bit to see what I'm faced with! I don't mind replicating the sill from the sheet I've got as it's good
Practice!! Where...
Hi all,
My fathers van failed its MOT the other day on the corrosion shown below among other things. Really im just looking for advice about the best way to tackle this. I am slightly worried that it appears to be very near to a seam, is this something to worry about or is it just a case of...
Can you explain more about the contamination issue, what causes it and how can I stop it?
Your right, I made a small frame for the bottom of the trolley and then forgot about a space for the gas so I'm extending the frame a little bit. I should of thought it through a bit more and made the...
Well I recently got a SIP migmate turbo 105 from a mate for £30 quid. I know these aren't the best welders ever but I thought it would be a good place to start and see if I enjoy/I'm any good at welding! I bought a bottle of hobbyweld 5 which is a 5% Argon and CO2 mix.
So I decided as a good...
Hello!
I'm Jamie, 21 years old from Edinburgh.
I recently picked up a sip migmate 105 from a mate for £30 as i'm interested in learning to weld but didn't want to spend a fortune!
My first project that I have just started is making a wee trolley for my welder/helmet/gas etc so il...
Rob as you know I have the same welder as you and it works! Bring it round this weekend and we can compare what you need and see if we can make something up!
If we fix my Vitara before you go back to Aberdeen you can have the regulator that I took off until you upgrade to a proper size gas...