Yes 3 stage filter...primary >coalescing> carbon. Yes I was just mocking up system so used short runs to test. I'm using 8mm bore pipe 12 od with 8mm bore fittings.
Ok thanks I will try that tomorrow...I have a small leak after the filter I need to replace the ptfe on the fitting could this also be causing condensation in the line?
Here is my setup
New 3hp 100l belt driven compressor
New Metal works 3 stage filter
New Visi airfed mask
There seems to be water in the line after the filteration process (between the exit of filter and mask)
I'm a little confused?
Hi all,
Need some advice, I have a bonnet with the lacquer peeling at the front, front 1/4 of the bonnet is effected.
Do I...
1. Sand and blend lacquer into the non peeling section
2. remove all lacquer and start again.
The tape I bought was from an auto paints shop and it struggled to stick to paper.
The Adhesive I used was recommended over tiger seal
http://www.geocel.co.uk/product.aspx?id=104&pr=mspr
Maybe it's just too cold here in Wales
I came across this on the web which made me smile, 35KG...
Hi all,
Need some advice on what adhesive to use for re-glueing side mouldings.
I have tried and failed with:
2mm Double sided tape FAIL
Caravan trim sealant FAIL
Thanks in advance.
Hi all,
I'm thinking about building a spray booth :clapping:
A steel box section frame with a sheet steel outer skin
Anyone done this?
Been reading about the different types of booth Eg downdraft ect..
There would obviously need to be some insulation to prevent condensation...
Thanks guys,
When I seen this paint it had contradicted everything I had learnt from this thread... I was furious:D wish I had never seen it.
Anyway the Finnish was spot on so worth remembering for a quick job.
I think this may be the same stuff
http://www.ebay.co.uk/itm/2K-ACRYLIC-CAR-PAINT-SILVER-METALLIC-GLOSS-500ml-/290606949306?pt=UK_Body_Shop_Supplies_Paint&hash=item43a98623ba&_uhb=1
Exactly my thoughts, Tin stated "all in one Metallic silver 2k acrylic" requires hardener to activate.
Did not use clear coat as it was all in one ?
I must admit the Finnish was very nice