Chances are it's never going to have a cold damp morning and low battery to ever need to start "12v start 9v run" is real old school stuff now
If she can't breathe it's a 999 shout, but obviously there all busy with it at the mo, 111 makes sense, I'm only week into it and stuffed for...
Anyone local with a machine shop will tackle it if there interested, LAB in Aztec business centre, maybe Brandon in Swansea engines or even...
Yep, that would do it :)
Would that work ?
I've used the tang of a file in the past, but no comparison of size to see if it would work ?
Have you tried using some tape across the lens to narrow the pick up area ?
Only time I ever experienced this was a coil pack breaking down, light load fine, foot down and it was carp !
Is there away of resetting the SAM unit ? It might be needed to tell the unit the bulb has been replaced ?
Maybe not clear enough ? bandsaw blade square to vice , then raise the metal at the desired angle so your cutting across the full width
I.ve always kept the blade square to the work piece and clamped the metal at the requed angle to give a nice straight edge
http://www.ebaystores.co.uk/3-Way-Components carry's most types of auto connectors
That's the one I got of my daughter, comes in handy at times !
They worked out ok :)
Wild guess but is there something that lets 2 units flash that's still operating on the one side ? I've seen the "angel eyes" being used as...
Check the stock cupboard for one of these ;)...
I don't think its any USB related stuff it's more like a vga connector
Have you tried a good 12 point socket to see if that would fit, probably 7/16ths at a guess ?
I used Kalimex on a cracked rover V8 and even dragged raced it and still running now !
Separate names with a comma.